A highly reflective 5 Year Conspicuity DOT Reflective tape to improve visibility of large vehicles, trucks and trailers on the road. DOT-C2 rated reflective tape is required for vehicles over 80″ wide and weighing over 10,000 lbs. DOT tape design is a series of reflective prisms that concentrate and reflect light, allowing the vehicle or trailer to be easily spotted in low light conditions. UV stabilized, weather and damage resistant, Incom reflective conspicuity tape is a durable material, constructed for a long-lasting service. One roll of tape These products are available in many colors and color combinations to ensure your vehicle or trailer meets the required regulations. Please ensure to clean the surface area before application with a good alcohol based surface cleaner. Our 5 Year durable conspicuity reflective truck tape is made by Incom, a respected manufacture in the industry. If your choice criteria calls for the finest conspicuity tape that money can buy then you have found the product for you. This DOT-C2 reflective conspicuity tape exceeds requirements of the NHTSA (49 CFR 571), and every strip carries the DOT-C2 watermark certification for compliance. This premium quality reflective tape provides the industry’s highest visibility guidance in wet or dry weather conditions with full reflective strength from distances of 1,000 feet or more. Modular pattern of reflective prisms allow it to be mounted in any position while maintaining reflective performance.
- 5 Year Durability
- Imprint Your Own Logo*
- Meets DOT-C2 Specifications
- 750 Candlepower
- Highest Night Time Visibility
*Please contact customer service for information on our custom imprint program. We are able to print your company name or logo to any of our conspicuity products.
Need to know the DOT Conspicuity Tape application requirements and regulations? See diagram and DOT tape application instructions in this guide: Requirements for Conspicuity DOT-C2 Reflective Tape for Trucks & Tractor Trailers to Meet Federal DOT FMCSA NHTSA Regulations
Federal requirements state that any truck trailer that is over 80″ wide and exceeds 10,000 lbs in weight need to be marked with red and white alternating DOT C2 reflective tape that is 2 inches wide running along at LEAST 50% of the length and must cover the full width of the exposed rear area. DOT-C2 tape is strictly controlled and only approved material can carry the DOT-C2 tape spaced text (all of our materials do and are clearly marked as such). Our conspicuity tape exceeds the following requirements and regulations; FMVSS 108, NHTSA (49 CFR 571), FHWA (for retrofit) and FMCSA. The great thing about buying Reflective DOT tape from us is that we can provide you the exact type you need, we can provide expert advice and ensure that you meet the standards keeping you on the right side of Federal regulations.
Our reflective DOT-C2 tape meets the standard and is retro reflective visible in excess of 1000 feet, the flexible polymeric film contains cube corners (effectively micro prisms), these allow it to be mounted in any position or angle and reflect the light back at an angle that is visible. The upper surface is completely smooth and is UV stable. During the day the colors are a vivid contrast of alternating red and white, these blocks are both completely reflective.
For FMCSA Retroreflective requirements for semitrailers and trailers Visit the FMCSA website
Part Numbers: V57203, V57206
* Adhesive products used on wood or coated surfaces may damage the finish.