Photoluminescent Glow in the Dark wall and floor tape ideal for marking along emergency exit pathways.
- Smooth surface for easy cleaning.
- Simple installation. Adhesive will bond securely to any smooth, dry surface. For applying onto porous surfaces (wood, concrete, stone etc.) we recommend the use of our surface primer prior to application.
Contractor Grade traction cleats with aggressive 60-Grit mineral abrasive compound and aggressive acrylic adhesive that will form a strong water-proof bond to most any clean dry surface.
The luminance of glow in the dark material is measured in millicandelas per square meter ( mcd/m2 ). Measurements of products are judged on how long an afterglow takes to reach 0.32 mcd/m2, which is when it is rendered ineffective. Premium is the best performer, at full charge taking approximately 1800 minutes ( 30 hours ) to reach 0.32 mcd/m2. Super takes approximately 450 minutes ( 7 hours ) to reach that mark. ASTM 2072 stipulates that the levels of luminance at 10 minutes should be 30mcd/m² and at 60 minutes should be 4.4mcd/m² and from the above results, we can show that they far exceed these regulatory requirements
Part Numbers: PHOT1, PHOT1Z, PHOT2, PHOT2Z, 81521,81541,81522,81542
* Adhesive products used on wood or coated surfaces may damage the finish.