DOT C2 Aluminum Reflective Plate (2" x 48") Glass Bead 6" red/6" white
Heskins 2” x 48” DOT C2 aluminum reflective plates are suitable for quick replacement on trucks and trailers when the need arises. With trucks and trailers being constantly out on the road when coming in for servicing, it is quite common that the reflective DOT tape will need to be replaced to meet regulations. With the use of DOT C2 aluminum reflective plates, the procedure is much quicker, preventing the need for excess cleaning to ensure a surface that the tape will effectively adhere to.
DOT C2 Aluminum Reflective Plate Application
Trailer rear marker plates can be fitted using a many of application methods. Rivets, bolts or even bonding tape would be perfect for applying or mounting the plates securely to a surface. Using these methods, they can be removed virtually as easily as they were applied, meaning replacement is a quick and efficient job.
Heskins reflective plates are not limited to the use of fleet vehicles either. Stationary objects such as fences and posts, in particular, the people who maintain them will also benefit from the ease of application they offer.
DOT C2 Tape
Pre-applied to the truck rear marker plates is Heskins DOT C2 tape glass bead 6” red/6” white, ensuring excellent performance and safety assurance when out on the road, with its retro-reflective properties ensuring a wider reflection of light, increasing visibility in virtually all conditions.
By using DOT C2 aluminum reflector plates, you can make fleet servicing much more efficient, ensuring safety standards are being met with less work involved, allowing you to focus your time on vehicle performance, safe in the knowledge that road and safety requirements & regulations are met.
A DOT C2 Aluminum Reflective Plate is a type of reflective tape that is commonly used on vehicles to improve visibility and safety, especially for commercial trucks and trailers.
DOT C2 refers to the US Department of Transportation (DOT) standard for reflective material that must be used on the sides and rear of trucks and trailers that are over 10,000 pounds gross vehicle weight rating (GVWR). The C2 standard requires the reflective tape to be highly visible to meet specific color and pattern requirements.
The reflective plate is typically made of aluminum with a highly reflective surface, which helps to increase the visibility of the vehicle at night or in low light conditions. The plate is often cut into strips or shapes and adhered to the sides and rear of the vehicle in accordance with DOT regulations.
Overall, the use of DOT C2 Aluminum Reflective Plate is an important safety measure for commercial vehicles, as it can help prevent accidents by improving visibility and reducing the risk of collisions with other vehicles on the road.