US Dollars
Canadian Dollar
Mexican Peso
Brazilian Real
Colombian Peso
Chilean Peso
Product Description
LiteMark Removable Dots
Removable adhesive vinyl dot decals from LiteMark - Quality you can count on. Perfect for classrooms, warehouses, gyms, retail spaces, social-distancing markers, spot-training, sports, seat spacing, event flooring, and temporary floor or wall marking. Cleanly removable up to 3 years from most smooth, non-porous surfaces.
Choose your pack size: Regular or Bulk
- Regular Pack - the everyday size. Great for a single classroom, small warehouse zone, or one event. Ships in a lightweight (~4 oz) envelope.
- Bulk Pack - 5x the count of the Regular pack at a better per-dot price. Ideal for large facilities, multi-classroom rollouts, or reselling. Ships ~16 oz.
The pack quantity varies by dot size so that each Regular pack contains roughly the same total square inches of vinyl. Bulk is always 5x the Regular count of the same size.
Pack counts by size
Sizes and Quanities
- 1" (140 per pack)
- 2" (80 per pack)
- 3.5" (18 per pack)
- 5.125" (16 per pack)
- 9.5" (5 per pack)
- 12" (4 per pack)
| Size | Regular | Bulk | ||
|---|---|---|---|---|
| 1" | 140 | 700 | ||
| 2" | 80 | 400 | ||
| 3.5" | 18 | 90 | ||
| 5.125" | 16 | 80 | ||
| 9.5" | 5 | 25 | ||
| 12" | 4 | 20 |
13 color options
Made from genuine Oracal 631 removable vinyl in these colors:
White (010) - Yellow (022) - Golden Yellow (020) - Orange (034) - Red (031) - Pink (045) - Purple (040) - Baby Blue (056) - Blue (057) - Green (061) - Yellow Green (064) - Grey (072) - Black (070)
Product specs
- Material: Oracal 631 matte removable vinyl
- Adhesive: Removable, low-tack - clean removal up to ~3 years from smooth surfaces
- Application: Indoor use recommended - smooth, clean, non-porous surfaces
- Made in the USA
- Made-to-order - please allow 1-2 business days production before shipping
How to apply
- Clean the surface with isopropyl alcohol and let it fully dry.
- Peel the dot from its backing.
- Press firmly onto the surface, working out any air from the center outward.
How to remove
Lift a corner and pull the dot back at a low angle (about 30 degrees). For long-installed dots, warming gently with a hair dryer helps release the adhesive cleanly.
Colors on your screen are for reference only - actual vinyl color may vary slightly from your monitor.
Frequently Asked Questions
What is LiteMark Removable Vinyl Made From?
LiteMark Removable dots are cut from ORACAL® 631 Exhibition Cal, a 3-mil (80 micron) soft-PVC vinyl with a matte finish and a clear, water-based removable polyacrylate adhesive. It's the industry go-to for removable craft and marking vinyl, chosen specifically because it comes off cleanly — no residue, no paint damage.
How long will the vinyl dots last?
Outdoor durability is up to 3 years under vertical exposure, and indoor life is effectively indefinite. Oracal 631 is rated for medium-term applications, so it's built to last through the life of a training program or seasonal layout but designed to peel away cleanly when you're done.
Are they truly removable? Will they leave residue or damage my floor?
Yes — they remove residue-free from most smooth, sealed surfaces within the 3-year service window. The specially formulated water-based adhesive is engineered for clean removal from sealed concrete, VCT, epoxy floors, painted drywall, and other non-porous surfaces. Lift a corner and pull back at a low angle (about 30 degrees). For dots that have been down for a long time, gently warming with a hair dryer helps the adhesive release cleanly.
What surfaces can I apply LiteMark dots to?
LiteMark dots work best on flat and simple-curve surfaces that are smooth, sealed, and non-porous. Ideal surfaces include sealed concrete, VCT and vinyl tile, epoxy-coated floors, painted drywall, laminate, glass, sealed wood, metal, and most polished plastics. Avoid raw concrete, unsealed wood, brick, textured rubber, or heavily embossed surfaces — the adhesive needs a smooth interface to seal properly.
What's the difference between the Regular pack and the Bulk pack?
Regular packs are sized for a single classroom, training bay, or small project (starting at 3 dots for the 12" size, up to 420 dots for 1" dots). Bulk packs contain 5× the quantity at a lower per-dot cost — ideal for warehouses, gyms, sensory paths, event floor plans, or any large-scale rollout. Both packs use the exact same vinyl, adhesive, and print quality.
How many dots come in each size?
Pack counts vary by dot size to keep each pack a similar footprint. Regular / Bulk quantities:
- 1" dots — 420 / 2,100
- 2" dots — 110 / 550
- 3.5" dots — 35 / 175
- 5.125" dots — 16 / 80
- 5.5" dots — 14 / 70
- 8.5" dots — 6 / 30
- 9.5" dots — 5 / 25
- 10" dots — 4 / 20
- 12" dots — 3 / 15
Do the dots come off in cold or hot temperatures?
Once applied, the vinyl handles temperatures from -40°F to +176°F without variation. Apply the dots when the surface is at least 50°F with humidity above 50% for best adhesion — if your space is colder than that, warm the floor with a hair dryer or heater before installing.
Are LiteMark dots waterproof? Can I mop over them?
Yes — Oracal 631 is fully water resistant and passes 48-hour water immersion tests with no variation. You can sweep, mop, and even use a floor scrubber over installed dots. Avoid harsh solvents or aggressive chemical strippers, which can attack any vinyl adhesive.
Are they safe for kids, schools, and sensory paths?
Yes — Oracal 631 carries an ASTM E 84-07 Class "A" fire rating (self-extinguishing on steel) and is the same vinyl used in classroom sensory paths across the country. There are no exposed adhesives or sharp edges, and the matte finish reduces glare that can distract children on the spectrum. The dots are non-toxic once applied and cured.
Are the colors real Oracal 631 pigments?
Yes — every LiteMark Removable Dot is cut from a genuine Oracal 631 color. The 13 colors we stock are:
- White (010), Yellow (022), Golden Yellow (020), Orange (034), Red (031)
- Pink (045), Purple (040), Baby Blue (056), Blue (057)
- Green (061), Yellow Green (064), Grey (072), Black (070)
Are LiteMark Removable Dots made in the USA?
Yes — every LiteMark dot is cut, packed, and shipped from our Turner, Oregon facility using genuine Oracal 631 vinyl. Custom colors, custom sizes, and bulk quantities beyond what's listed are available — contact us for a quote.
Can I get custom sizes or shapes?
Yes — if you need a size, quantity, or color combination not listed here, we cut custom orders in-house. We also offer arrows, triangles, squares, feathers, and other shapes in the same Oracal 631 vinyl. Reach out through iFloortape.com for a custom quote.
What's the shelf life if I don't use them right away?
Sealed in their original packaging at room temperature (68°F / 50% relative humidity), the raw vinyl has a 2-year shelf life per Oracal's technical data sheet. Store the dots flat, out of direct sunlight, and away from heat sources.
How is this different from cheaper Amazon floor dots?
Most low-cost floor dots are cut from generic PVC with permanent or aggressive adhesives that leave residue or lift paint on removal. LiteMark dots are cut from genuine Oracal 631 — a manufacturer-branded material with a verifiable 3-year outdoor rating, clean-removal adhesive chemistry, and consistent lot-to-lot color. When you're marking a training area, retail store, or classroom, the ability to remove without damage matters more than the sticker price.
